MONOKEI Kei V2

Q&A Video! SOUND TEST!

Configurator to decide on what you will get!

Buy EXTRA PARTS: 60% | 65%

Additional parts to complete your build: Switches | PCB-mount Stabilizers | Keycaps

General Disclaimer

This is a Group Buy/Pre-order so it will be delivered outside of our normal processing time. Please read our REFUND POLICY before making a purchase. No cancellations allowed.

Quality Disclaimer

While we strive to provide a perfect experience no kit can be 100% flawless at our scale of production, as such the caveats are as follows:

No scratches on exposed / user facing parts of the keyboard (after installation of plate & PCB).

Possible machining marks / micro scratches on the inside of the kit / pieces not exposed to the user. This includes scratches arising from anodisation hooks.

Screw holes are NOT anodised.

Possible marks close to screw area.

Raw top and bottom pieces may have scratches present and are susceptible to scratches. These raw parts may also be tarnished over time if left uncoated.

Anodisation and e-coating variation may be present between top and bottom pieces.

Copper patina: Copper as a material tarnishes over time, you can clean it but note that it's a form of oxidation that we cannot control.

Marks / streaks that are not visible after assembly.

Please note that your purchase denotes agreement to group buy rules which include all the above.

Introduction

A true classic, refined. The Kei v2, powered by our all-new BT chip is our take on next generation custom mechanical keyboards. It's simpler, lighter, and wayyyy more fun.

This is not the greatest board in the world, no, this is a tribute.

Specifications

Typing angle: 6 degrees "Unassembled Weight (approx.):

• Copper top case with aluminium bottom case: 1.8 kg
• Aluminium top case with aluminium bottom case: 1.1 kg
• Polycarbonate top case with polycarbonate bottom case: 0.7 kg"

Mounting Style: Gasket Socks

Keyboard Dimensions for 60%: 30 (W) x 12 (L) x 3 (H) cm

Keyboard Dimensions for 65%: 32 (W) x 12 (L) x 3 (H) cm

Front Height: 1.8 cm (without feet)

MX PCB Specs:

Designed for MONOKEI by Kopibeng Only compatible with MX switches. Supports PCB mount stabilisers DB: Bluetooth daughterboard by MONOKEI Spacebar Orientation: North 1.6 mm FR4 PCB RGB underglow USB-C PCB comes flashed with the requisite firmware. Please use VIA to modify.

EC PCB Specs:

Designed for MONOKEI by Cipulot Only compatible with electrocapacitive parts. Tested with Deskeys and OEM parts. DB: Bluetooth daughterboard by MONOKEI Spacebar Orientation: North 1.6 mm FR4 PCB USB-C

2u mods are EC compatible (not included in the bundle) Spacebar requires MX plate mount 7u stabiliser (not included in the bundle) Comes with requisite screws & 2x stabiliser pads Comes with 1x spacebar 1u housing PCB comes flashed with the requisite firmware. Please use VIA to modify it.

Contents

 

Top and Bottom cases with magnets and magnet caps installed (colour and material of your choice)

Solder / Hotswap / EC PCB (EC PCB comes with EC plate screws)

Aluminium Silver MX or EC full plate

Silicone Pack containing 4 x feet, 8 x gasket socks, 1 x USB cover, 1 x battery sleeve and 1 x plate dampener (in Frost White) (Includes a Seion sheet in PORON® Black)

Bluetooth Daughterboard Pack (contains bluetooth daughterboard, daughterboard screws, daughterboard cable, and lithium-ion polymer battery)

Accessories (sticker pack, instruction booklet, and microfibre cloth)

Kaban (Kei Edition)